[Free] 2019(Nov) EnsurePass IBM C9010-022 Dumps with VCE and PDF 71-80

Get Full Version of the Exam

Question No.71

In the following figure, what TWO things must be done before an EtherChannel can be created from the ent0 and ent1 adapters?


  1. The ent0 and ent1 adapters must be connected to different switches to provide both additional bandwidth and adequate redundancy in the EtherChannel that is created.

  2. EtherChannel support capability must be verified for the Ethernet switch.

  3. The IP configuration must be removed from en0.

  4. The AIX host must be completely disconnected from the network,

  5. The en1 interface must be configured with IP information.

Correct Answer: BC

Question No.72

Which command displays from which disk the operating system was last booted?

  1. last

  2. bosboot

  3. getconf

  4. bootlist

Correct Answer: C

Question No.73

Which action will temporarily disable remote login access using telnet and ssh for all non- root accounts?

  1. Update /etc/security/passwd and recycle the inetd subsystem.

  2. Stop the sshd subsystem.

  3. Create a/etc/nologin file.

  4. Set the PermitLogins parameter in /etc/ssh/sshd_config and recycle the sshd daemon.

  5. Touch the /etc/sshd/nologin file and recycle the sshd daemon.

Correct Answer: C

Question No.74

An administrator needs to determine if system microcode is at the most currentlevel. Which tool will identify current microcode levels, and provide an output file which can be used by the IBM Microcode Discovery Service (MDS) for comparison?

  1. FLRT

  2. invscout

  3. Ismcode

  4. prtconf

  5. urncode_latest

Correct Answer: B

Question No.75

A company has numerous LPARs hosting database servers, and three versions of the DBMS deployed in the environment. A critical APAR fixes data corruption for one version of the database, but it requires a server reboot. The only inventory information available is a spreadsheet with every LPAR#39;s hostname and root password. Which sequence of tasks will determine which servers are missing the critical APAR, and only apply it to the servers running the affected level of the database?

  1. Use the spreadsheet to populate the /etc/hosts file on the management node. Configure a NIM server that has the APAR in an lpp_source.

    Force-register all of the LPARs with the NIM server.

    Use NIM group operations to install the APAR and boot at a scheduledtime.

  2. Use the spreadsheet to create a dsh node list.

    Use dsh with Islpp to create a node list for LPARs needing the APAR. Use dcp and dsh to install the APAR and reboot.

  3. Configure a Systems Director server using the spreadsheet import function. Use the inventory function to discover the database level and APAR status. Use the Update Manager to apply the APAR to the affected LPARs and reboot.

  4. Use the spreadsheet to create a dsh node list. Use dcp and dsh to install the APAR.

Use dsh to reboot the systems.

Correct Answer: B

Question No.76

Given the following crontab entry, when will the job run? 30 5 * 9 * /usr/local/bin/maintenance

  1. Every day in September at 05.30

  2. Every day at 05.00 and 09.00 for 30 days

  3. Every 30 minutes for the first 5 days in September

  4. Only on the 30th of May in 9 minute intervals

Correct Answer: A

Question No.77

What file needs to be modified to disableboth telnet and local logins for the root UserlD?

  1. /etc/security/limits

  2. /etc/security/passwd

  3. /etc/environment

  4. /etc/security/user

Correct Answer: D

Question No.78

Performance monitoring is needed for a managed system containing multiple AIX7 LPARs. Which action enables historical data capture for the managed system?

  1. Implement IBM Systems Director StandardEdition.

  2. Run snap data collections periodically.

  3. Configure the trace facility to capture details on system activity.

  4. Configure NMON to collect interval-based performance data.

Correct Answer: D

Question No.79

The/usr/sbin/clcmd command is not working as documented in an administrator#39;s reference. How can the administrator determine if the command being run is at the same level as the command being referenced in the documentation?

  1. Get the fileset name from Isipp-f, then check the level of the file set with lslpp-1.

  2. Use Islpp-wto get the fileset name, then check the level of the file set with lslpp-1.

  3. Use lslpp-1 to determine the fileset name and check the level.

  4. Use Is-I to determine the last modified date of the command.

Correct Answer: B

Question No.80

A system administrator wants to create a server with network redundancy and maximum I/O throughput over two Ethernet cards. Which option will support the requirement?

  1. Create an 802.3ad Link Aggregation adapter backed by both Ethernet cards and cable to a switch with 802.3ad enabled ports.

  2. Create a Network Interface Backup (NIB) with each Ethernet card being cabled to a different switch.

  3. Create the file /etc/sysconfig/network-scripts/ifcfg-bond0 then edit the two ifcfg-ethX configuration files to add a master or slave option. Cable to two switches and use 802.3ad enabled ports.

  4. Create a virtual adapter and assign it to the server, use both Ethernet adapters as backing devices to the virtual adapter with the mkvdev command. Have each adapter cabled to separate switches.

Correct Answer: A

Get Full Version of the Exam
C9010-022 Dumps
C9010-022 VCE and PDF

Leave a Reply