[Free] 2019(Nov) EnsurePass Juniper JN0-102 Dumps with VCE and PDF 11-20

Get Full Version of the Exam
http://www.EnsurePass.com/JN0-102.html

Question No.11

Which command is used to restore a Junos device to its default state?

  1. load factory-default

  2. load override factory-default

  3. load replace default

  4. load set default

Correct Answer: A

Question No.12

Exhibit

user@routergt; show system alarms 1 alarms currently active

Alarm time Class Description

2013-09-14 23:54:01 UTC Minor Rescue configuration is not set

Exhibit

Which command will resolve the problem shown in the exhibit?

  1. user@routergt; request system configuration rescue save

  2. user@router# request system configuration rescue save

  3. user@routergt; file copy current /config/rescue.conf

  4. user@router# file copy current /config/rescue.conf

Correct Answer: A

Question No.13

Which process is responsible for the configuration of the router and all user commands on a Junos device?

  1. rpd

  2. chassisd

  3. dcd

  4. mgd

Correct Answer: D

Question No.14

You must apply the family inet configuration parameter only to Gigabit Ethernet interfaces that are in FPC 2. Which output applies to this configuration?

  1. [edit groups] user@router# show ge-int {

    interfaces {

    lt;ge-*gt; { unit 0 { familyinet;

    }

    }

    }

    }

  2. [edit groups] user@router# show ge-int {

    interfaces {

    lt;*gt; {

    unit 0 { familyinet;

    }

    }

    }

    }

  3. [edit groups] user@router# show

    ge-int { interfaces {

    lt;*-2/*/*gt; { unit 0 { familyinet;

    }

    }

    }

    }

  4. [edit groups] user@router# show ge-int {

interfaces {

lt;ge-2/*gt; { unit 0 { familyinet;

}

}

}

}

Correct Answer: D

Question No.15

Which command gracefully shuts down the Junos OS?

  1. request system reboot

  2. request system logout

  3. request system halt

  4. restart gracefully

Correct Answer: C

Question No.16

Exhibit

inet.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)

= Active Route, – = Last Active, * = Both 172.23.10.0/24 *[Direct/0] 21:59:56

gt;via ge-0/0/6.0

172.23.10.100/32 *[Local/0] 22:00:10

Local via ge-0/0/6.0 172.23.12.0/24 *[Static/5] 00:01:36

gt;to 172.23.10.1 via ge-0/0/6.0 172.23.15.0/24 *[Static/5] 00:01:36

gt;to 172.23.10.1 via ge-0/0/6.0

Exhibit

Users are unable to access resources in the 172.23.14.0/24 subnet.

Referring to the exhibit, which two actions would solve this problem? (Choose two.)

  1. Configure a separate routing instance.

  2. Configure a default static route.

  3. Configure a static route to 172.23.14.0/24.

  4. Configure the existing routes to resolve the indirect next hop.

Correct Answer: BC

Question No.17

Which statement describes exception traffic?

  1. Exception traffic must be sent to the PFE for processing.

  2. Exception traffic enters one ingress port and is sent out multiple egress ports.

  3. Exception traffic is rate-limited on the internal link to prevent DoS attacks.

  4. Exception traffic is processed after forwarding traffic when congestion exists.

Correct Answer: C

Question No.18

Which command will display the active configuration?

  1. user@routergt; show configuration

  2. user@router# show

  3. user@routergt; show system configuration

  4. user@routergt; show system commit

Correct Answer: A

Question No.19

Which command prompt indicates that you are in operational mode?

  1. user@routeramp;

  2. user@router#

  3. user@router%

  4. user@routergt;

Correct Answer: D

Question No.20

Which configuration parameter on a Junos device alters the default next-hop resolution behavior of a static route?

  1. no-readvertise

  2. resolve

  3. preference

  4. passive

Correct Answer: B

Get Full Version of the Exam
JN0-102 Dumps
JN0-102 VCE and PDF

Leave a Reply